DIY Hanging Bottle Opener

This was a coordinated effort between myself and my husband so we could surprise the Dad's in our family at our annual Father's Day barbecue!

This DIY hanging bottle opener was the perfect gift. It was pretty simple to make and we learned a few lessons along the way, but overall we are really happy with how they all turned out!
​

Supplies Needed:

• Some scrap 1"  x 4"wood cut approximately 16" long 
• ​Sandpaper
• Stain (after making one painted, we recommend using stain only)
• Bottle openers (affiliate link)
• Pint mason jars
• Hose clamp (about 3" diameter - measure jar!)
• Screws (3 small)
• Paper with printed out sayings and pictures (download a pdf of the ones I used here).
• Chalk
• Pencil
• Paint Pens
• Clear Spray Finish

Directions:

• Sand wood lightly
• Stain and let dry thoroughly
• Print out saying and picture to fit in 4 x 8 area
• Chalk the back side of the picture, then place it on the wood and trace the outline with pencil. See How to Rustic Sign Lettering Post here!
• ​Paint the letters and pictures with black paint pen
• Clear spray finish the entire piece
• Screw on the bottle opener (affiliate link) near the top
• Screw on the clamp and then add the jar and tighten. See Hanging Mason Jar Rack Post here!
• ​Unit is best affixed securely to the wall, but you can drill holes and use some rope to hang it.

A link to download the pdf for all of the pictures seen above can be found below and at the bottom of the post!

link to beer sign printable

Thanks for visiting!
Check out all my other DIY ideas here on this site or on myPinterest Board!
Please follow me on social media as well :-)
​Sincerely,

link to beer opener printables